Used Evinrude 75hp E-Tec Outboard Motor for sale — Nationwide U.S. Shipping by Scott Outboard Motors llc

Looking for punchy mid‑range power that won’t bully your transom—or your wallet? Meet the sweet spot: Used Evinrude 75hp E-Tec Outboard Motor for sale. This direct‑injection (DI) two‑stroke is famous for quick holeshot, light weight, and low‑touch upkeep. At Scott Outboard Motors llc, we verify, service, and ship E‑TEC 75s anywhere in the United States with clear inspection reports and friendly rigging support. Translation: fewer surprises, more Saturdays on the water.

Why Choose a 75 HP E‑TEC (Power, Simplicity, Weekend‑Friendly)

• Power‑to‑weight that pops: Crisp acceleration and confident mid‑range for 16–19 ft boats.

• Clean DI two‑stroke: Minimal smoke, smart oiling, strong torque—ideal for inshore runs and long lakes.

• Low‑touch maintenance: Extended intervals and auto‑winterization (on many models) save time and money.

• U.S. parts & know‑how: Support is available across the States, which helps uptime and resale value.

What to Check Before You Buy (The Buyer’s Checklist That Matters)

EMM Hours, Fault Codes & Service Records

• We pull an EMM (engine computer) scan to verify hours and review stored/active codes.

• Look for routine gear lube, spark plugs, fuel filtration, and cooling‑system attention in records.

Compression & Gearcase Integrity

• Even compression across cylinders = healthy heart.

• A gearcase pressure/vacuum test confirms seals (critical for long service life). Used Evinrude 75hp E-Tec Outboard Motor for sale.

Oil Mode & Fuel Quality

• E‑TECs are programmed for XD50 or XD100 oil. We confirm oil‑mode so you use the right lubricant from day one.

• Clean fuel + water‑separating filter = fewer headaches and happier injectors.

Shaft Length, Controls & Gauges

• Shaft length: typically 20″ (L) or 25″ (XL)—match your transom height. Used Evinrude 75hp E-Tec Outboard Motor for sale.

• Controls: usually remote mechanical. We can bundle control cables, key switch, and harness when listed or quote a complete kit.

• Gauges & data: Compatibility with I‑Command/NMEA 2000 varies; ask what’s included on your unit.

Charging Output & Electronics

• We verify charging performance in the tank so your MFDs, stereo, pumps, and lights stay powered all day.

Fresh vs. Salt History

• Salt is fine with proper care. Our photo set and notes highlight anodes, brackets, fasteners, and wiring so you can judge condition quickly.

U.S. Sales, Testing & Shipping — How Scott Outboard Motors llc Handles It

Multi‑Point Inspection (No Guesswork)

• Visual: cowling, mounts, clamps, harnesses, rigging

• EMM scan for hours and codes

• Compression (and leak‑down where applicable)

• Gearcase pressure/vacuum test

• Test‑tank run for idle quality, shift engagement, cooling flow, and charging output

Fresh Service Before Freight

• New gear lube

• Spark plugs as needed

• Water‑pump impeller replaced or verified recent

• Fuel/water‑separator serviced

• Anodes checked/renewed; hardware torqued to spec Used Evinrude 75hp E-Tec Outboard Motor for sale.

Documentation & Photos

You get serial verification, high‑resolution photos, and a written inspection/service summary. What you see is what shows up.

Insured Nationwide Shipping (USA)

Crated, strapped, and insured—coast‑to‑coast delivery with liftgate options. Residential, marina, or shop delivery. Need help at installation? We can refer installer partners in many U.S. markets.

Transactional Sections (Built for Action & Search)

Buy Used Evinrude 75 E‑TEC Outboard — In Stock & Ready to Ship

Reserve your motor with a small, documented deposit while we schedule insured U.S. freight and any rigging bundle you want.

Evinrude 75 E‑TEC Outboard Price — Get a Written Quote

Pricing depends on model year, hours, condition, and included rigging. Request today’s Used Evinrude 75hp E-Tec Outboard Motor for sale price with delivered cost to your ZIP.

Used Evinrude Outboard for Sale Near Me — We Deliver Nationwide

From Florida and the Carolinas to the Great Lakes, Gulf Coast, Rockies, and the Pacific Northwest, “near me” becomes “at your dock.”

Financing & Trade‑Ins (USA)

Financing may be available for qualified buyers; trade‑ins considered after inspection and serial verification.

Fit & Performance — Will 75 HP Suit Your Boat?

Boats That Love a 75

• Center consoles & bay boats (16–19 ft)

• Aluminum multispecies and fish‑and‑ski rigs

• Pontoons/tritoons rated for 75 HP

• Inshore skiffs where light transom weight matters

Prop & Setup Tips

• Stainless for bite/durability; aluminum for budget/forgiveness.

• Pitch to hit target WOT RPM with your usual crew and load.

• Balance battery/fuel placement for faster planing and easier trim response. Used Evinrude 75hp E-Tec Outboard Motor for sale.

Used Outboard Motors for Sale USA — What’s Included (Read Each Listing)

• Engine with serial verification

• Controls, harnesses, key switch, gauges (when listed)

• Propeller (if included) matched to your performance goals

• Inspection & service summary

• Coverage options (when available on used units) Used Evinrude 75hp E-Tec Outboard Motor for sale.

If a rigging bundle isn’t included, we’ll quote exactly what you need—clear and simple.

How to Order (4 Easy Steps for U.S. Customers)

1. Tell us your setup: boat model, transom height, existing controls/gauges, electronics, typical load.

2. Get a written quote: engine, any rigging or accessories, and insured shipping to your ZIP.

3. Reserve your motor: deposit + paperwork while we schedule freight.

4. Delivery & install: we ship; you install or use one of our referral partners.

FAQs — Evinrude 75 E‑TEC (United States)

Q1: Is the 75 E‑TEC a direct‑injection two‑stroke?
A: Yes—DI two‑stroke with strong torque, clean running, and efficient oil use.

Q2: Which oil should I use—XD50 or XD100?
A: We confirm your engine’s oil‑mode programming via EMM and note it in your report. Always use the oil it’s set for.

Q3: Does it have auto‑winterization?
A: Many E‑TECs support auto‑winterization; we’ll note if your unit includes it and provide the procedure.

Q4: Will my current controls and gauges work?
A: Often yes. If not, we can supply remote‑control rigging, harnesses, and compatible gauges or I‑Command/NMEA 2000 options.

Q5: Can I see compression, EMM hours, and gearcase results?
A: Absolutely—your inspection summary includes compression data, EMM readout, and pressure/vacuum test results.

Q6: Do you ship everywhere in the U.S.?
A: Yes—insured, nationwide shipping with liftgate and marina delivery options.

Q7: Is there any warranty or coverage on used units?
A: Factory transfer depends on eligibility. We also offer coverage options on many used engines—ask with your quote.

Q8: How fast will a 75 push my boat?
A: It depends on hull, load, and prop. Share your setup—we’ll give realistic ranges (not dock‑talk guesses).

Q9: Do you accept trade‑ins or offer financing?
A: Trade‑ins considered after inspection/serial verification; financing may be available for qualified U.S. buyers.

Q10: What paperwork do I receive?
A: Bill of sale, serial verification, and your inspection/service report; we’ll outline typical state registration steps. Used Evinrude 75hp E-Tec Outboard Motor for sale.

Why Buy from Scott Outboard Motors llc

• Verified testing: EMM scan, compression, gearcase, and test‑tank run

• Fresh service before freight so you start clean

• Transparent pricing: written quotes with delivered cost

• Insured nationwide shipping across the United States

• Rigging guidance & installer referrals so launch day is easy Used Evinrude 75hp E-Tec Outboard Motor for sale.

Ready to Repower? Get Your Quote Today

Browse our current Used Evinrude 75hp E-Tec Outboard Motor for sale listings and request a delivered quote to your ZIP code. We’ll confirm availability, pricing, and the best rigging plan for your boat—fast, clear, and friendly.

Evinrude® and E‑TEC® are trademarks of BRP US Inc. Scott Outboard Motors llc is an independent seller of pre‑owned outboards. Used Evinrude 75hp E-Tec Outboard Motor for sale.