Used Evinrude E-TEC 250hp Outboard Motor for Sale — Serious Power for US Offshore & Big-Water Boats
If you’re chasing offshore fish, running big lakes, or moving a heavy center console or bay boat, a Used Evinrude Etec 250hp Outboard Motor for sale is a smart, high-torque choice. This guide explains what US buyers should check before purchase, common specs and features, pricing expectations, and why Scott Outboard Motors LLC is a trusted seller for inspected, serviced E-TEC 250 engines with nationwide delivery across the United States.
Why Choose a Used Evinrude E-TEC 250?
Evinrude’s E-TEC direct-injection two-stroke technology delivers instant throttle response, strong low-end torque, and excellent power-to-weight. For heavy loads, quick hole shot, and crisp mid-range, the 250 E-TEC is a proven performer that many US anglers and charter captains rely on.
Key Advantages
-
Direct Fuel Injection (DFI) two-stroke torque for fast planing and strong acceleration
-
Competitive fuel economy vs. similar HP four-strokes at cruise
-
Simplified maintenance intervals (historically “no dealer scheduled maintenance for 3 years/300 hours” on many models—confirm for the specific unit)
-
Power-to-weight edge that helps transom balance on performance hulls
-
Good parts access via established aftermarket and dealer networks in the USA
What to Check Before You Buy (US Buyer’s Checklist)
When evaluating any Used Evinrude Etec 250hp Outboard Motor for sale, focus on proof, paperwork, and performance.
1) Verified Hours & EMM Report
-
Request an EMM (Engine Management Module) printout for verified hours, run profile (RPM distribution), and any stored fault codes.
-
Balanced RPM profile (not only high-RPM time) is a positive sign.
2) Compression & Leak-Down
-
Uniform compression across cylinders.
-
Leak-down test results (if available) give extra confidence in ring and cylinder sealing.
3) Injector & Fuel System Health
-
Ask for injector flow data or service history. Clean DI injectors are essential for smooth power and economy.
-
Inspect fuel lines, VST, filters; confirm ethanol-safe components.
4) Cooling System & Lower Unit
-
Evidence of water pump/impeller service and thermostat checks.
-
Lower unit: clean gear lube (no metal, no milkiness), no water intrusion, smooth shifting.
-
Inspect prop for dings (impact clues) and propshaft runout if noted.
5) Corrosion & Saltwater Use
-
Check mid-section, mounts, exhaust housing, anodes.
-
For saltwater boats, verify regular freshwater flushing, anti-corrosion spray, and anode maintenance.
6) Controls, Rigging & Gauges
-
Confirm system type: mechanical controls vs. Evinrude ICON/ICON II digital controls (where applicable).
-
Clarify inclusions: control box, key switch, harness, ignition lanyard, gauges, cables.
-
Note shaft length (25″ XL / 30″ XXL) and steering (single/dual cable, hydraulic, or power-assist).
7) Software Updates & Campaigns
-
Ask whether software/EMM updates and any historical service bulletins were completed.
8) Test Run & Documentation
-
Cold start, hot restart, trim/tilt function, charging output, and WOT RPM in range.
-
Get photos/video and a written condition report.
Typical Specs You’ll See on a 250 E-TEC (Varies by Year)
-
Horsepower: 250 HP
-
Induction: Direct-Injection 2-stroke (E-TEC)
-
Shaft Lengths: XL (25″) and XXL (30″)
-
Weight: competitive for class; confirm exact model tag
-
Charging: high-output alternator to support electronics
-
Features (model dependent): power trim/tilt, digital throttle/shift on ICON rigs, multi-function gauges, NMEA 2000 compatibility
(Always ask us for the exact model’s spec sheet for accuracy.)
Is 250 HP Right for Your Boat?
A 250 E-TEC is a great match for 22–27 ft center consoles, offshore deep-V hulls, heavy bay boats, and performance pontoons. For twin setups, confirm transom capacity and spacing.
-
Verify max horsepower on the boat’s capacity plate.
-
Match shaft length (25″/30″) to transom height.
-
Ensure hydraulic steering (recommended at this power) and adequate fuel supply/filtration.
-
Select prop pitch to hit recommended WOT RPM under typical US load (crew, fuel, gear).
Price Guide in the United States
Pricing for a Used Evinrude Etec 250hp Outboard Motor for sale depends on model year, total hours, EMM history, shaft length, controls, and cosmetic/structural condition:
-
Entry Range: Higher hours or cosmetic wear; may need injector service or impeller
-
Mid Range: Solid service history, clean EMM report, reasonable hours, controls included
-
Top Range: Low hours, excellent cosmetics, full rigging, recent injectors/impeller, documented updates
Tip: A slightly higher price for a dealer-inspected, sea-trialed motor often saves money versus a cheaper unknown that needs injectors, coils, or lower-unit work.
Buy Across the USA from Scott Outboard Motors LLC
We specialize in US sales of Used Evinrude Etec 250hp Outboard Motor for sale inventory and ship nationwide.
Our Certified Pre-Owned Process
-
Multi-point inspection: compression, EMM diagnostics, injectors, spark, fuel/cooling, trim/tilt, charging
-
Fresh service: gear lube, water pump/impeller, filters; injector testing/service as needed
-
Run verification: tank or on-water test for idle quality, throttle response, and WOT performance
Clear, US-Ready Documentation
-
Condition report with compression and EMM data
-
Photos/video on request
-
Exact shaft length, rigging list, and included hardware
Nationwide Convenience
-
Fast shipping across the lower 48 states (insured, professionally crated)
-
Flexible payment and financing options for qualified buyers
-
After-sale support for prop selection, rigging guidance, and installer referrals
Ownership Tips for US Waters
-
Use ethanol-managed fuel (treat and stabilize if stored).
-
Maintain fuel/water separators and change filters per interval.
-
Keep anodes fresh; rinse after saltwater use.
-
Monitor WOT RPM with your prop/load and adjust if needed to stay in the recommended range.
Transactional Keywords to Help You Shop
Buy Used Evinrude E-TEC 250 Outboard Near Me
We offer remote video inspections, paperwork handling, and nationwide US delivery, so “near me” convenience comes to your dock or driveway.
Certified Pre-Owned Evinrude 250 with Warranty Options
Ask about inspected units with limited dealer warranty availability and detailed EMM/inspection reports.
Best Price on Used 250 E-TEC — Finance & Delivery
We provide fair, market-based pricing, financing for qualified US buyers, and fast, insured shipping to marinas and residences.
FAQs — Used Evinrude E-TEC 250 (USA)
Q1: Are E-TEC 250 parts and service still available in the United States?
Yes. Parts and service are available via established dealers and reputable aftermarket suppliers. We’ll help you identify a local service center near you.
Q2: What’s a good engine-hour range?
Hours matter less than EMM history, compression uniformity, and maintenance records. A well-maintained higher-hour engine can outlast a neglected low-hour unit.
Q3: Do you provide an EMM report?
For eligible motors, Scott Outboard Motors LLC provides EMM printouts, compression readings, and a full condition report.
Q4: What shaft length should I choose?
Match your transom: most offshore/deep-V rigs need XL (25″); some large hulls or bracketed setups need XXL (30″). Ask us if you’re unsure.
Q5: Can I get financing and US shipping?
Yes. We offer financing for qualified buyers and nationwide shipping to the lower 48, crated and insured.
Q6: Do you accept trade-ins?
We can evaluate trade-ins. Provide photos, serial number, hours, and recent service details for a quick estimate.
Q7: Can you help with prop and install?
Absolutely. We’ll recommend prop pitch for your hull/load and provide rigging guidance or connect you with trusted US marine techs.
How to Get Started Today
-
Contact Scott Outboard Motors LLC for current Used Evinrude Etec 250hp Outboard Motor for saleinventory.
-
Request EMM data, compression numbers, and photos/video.
-
Confirm shaft length, controls, and rigging.
-
Arrange payment/financing and nationwide delivery.
-
Install with our remote support—and head for blue water with confidence.
SEO Title
Used Evinrude Etec 250hp Outboard Motor for Sale | Certified, Inspected 250 E-TEC with US Shipping — Scott Outboard Motors LLC
Meta Description
Shop a Used Evinrude Etec 250hp Outboard Motor for sale at Scott Outboard Motors LLC. Certified, inspected E-TEC 250 units with EMM reports, warranty options, financing, and nationwide delivery across the United States. Buy with confidence today.

Be the first to review “Used Evinrude Etec 250hp Outboard Motor”